About the author

Related Articles

9 Comments

  1. 1

    Eduardo Bayón Perales

    This no longer applys as Viatta is not an option in AWS. Do you have a guide if we don’t have this viatta option

    Reply
    1. 1.1

      viktorious

      BTW, what I see as that information is still available on AWS….FYI.

      Reply
  2. 2

    viktorious

    The configuration for Ubiquiti is in this article, so maybe you can reuse the information?

    Reply
  3. 3

    Walter

    Thank you for this it really simplified things. I am able to ping from hosts in the VPC to our local site. However I am not able to ping from our local site to devices in the VPC. A trace route also just dies on the local site. It seems like there is a routing issue. Any ideas?

    Reply
    1. 3.1

      Will Holmes

      I had to set static routes on my EdgeRouter to reach the VPC network by running these on my EdgeRouter:

      set protocols static interface-route 192.168.20.0/24 next-hop-interface vti0
      set protocols static interface-route 192.168.20.0/24 next-hop-interface vti1

      Replace the CIDR Block with your VPC network.

      Reply
  4. 4

    viktorious

    Did you check the routes on the Edge router?

    Reply
    1. 4.1

      Walter

      Thank you for the prompt response. I would assume this line

      set protocols bgp 65000 network 192.168.1.0/24

      would take care of that. Am I missing something?

      Reply
  5. 5

    viktorious

    Please use show ip route and show ip route bgp to check what’s going on on your Edge router…(see my article)

    Reply
  6. 6

    Dillon

    Did you have any issues with PFS being enabled? I am able to establish phase1 but phase 2 fails with it disabled….When enabled I lose all connectivity to the router. I have an edge-X, and can’t seem to find a workaround.

    Reply

Leave a Reply to WalterCancel reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.